Skip to content
  1. Guides
  2. 1Zpresso J-Ultra
  3. Espresso

Espresso grind size

Espresso grind size on a 1Zpresso J-Ultra

For Espresso on a 1Zpresso J-Ultra, start at 1.0.2. That is about 250 µm, an extra fine grind.

1Zpresso J-Ultra setting for Espresso1.0.2Extra fine grind, ~250 µm
Finer 0.9.0Coarser 1.1.4Step size 2.5 µm

Adjusting from 1.0.2

WhenSettingParticle size
Finer: sour or thin cups0.9.0~221 µm
Start here1.0.2~250 µm
Coarser: bitter or dry cups1.1.4~281 µm

Lower numbers are finer. To grind finer, turn the setting down. Change one step at a time, and brew again before changing anything else.

Starting recipe for Espresso

Steps

  1. Weigh 18 g of coffee and grind it.
  2. Distribute and tamp level, then lock in the portafilter.
  3. Start the shot and the timer together, with the cup on a scale.
  4. Stop at about 36 g in the cup, around 25 to 30 seconds.
  5. Taste. Sour or thin: grind finer. Bitter or dry: grind coarser.

Other brew methods on a 1Zpresso J-Ultra

Espresso on other grinders

Questions

What grind setting is best for Espresso on a 1Zpresso J-Ultra?

Start at 1.0.2 and adjust by taste. Lower numbers are finer. To grind finer, turn the setting down.

How do I know if I should grind finer or coarser?

Shots run fast and taste sour: grind finer, or raise the dose a little. Shots run slow and taste bitter: grind coarser.

Where does this setting come from?

The 1Zpresso J-Ultra is mapped to particle size in microns, fitted from the Honest Coffee Guide's settings for this grinder. It is a starting point, not a guarantee.